Choosing the most suitable floor

Choosing the most suitable floor | Gurgaon | Noida | Delhi NCR

The floors not only serve as passable surfaces as they can provide a very important decorative value to the spaces. That is why; today we tell you all about floors. Types, installation, costs and styles. A guide with everything you need to know to renew your old floors and leave them as new.

Types of floors

Whether made of stone, bamboo, wood, cement, ceramic or vinyl, floors are large or small areas that cover the floor of a property. They bring comfort, warmth and aesthetic value to spaces. Floors also serve to hide electrical and plumbing installations. They can be located in open or closed spaces, terraces, balconies and outdoors. They can also be glass, like those seen in elevators, or incorporate heating, as seen in some Nordic countries.

What kind of floors to choose?

The choice of material for the floor covering is affected by factors such as cost, resistance, thermal and acoustic insulation, comfort and cleanliness. Some types of flooring should not be laid lower than floor level and laminate or hardwood should be avoided where moisture or condensation may be present. The wooden floors add warmth to the environments and luminosity.

The ceramic ones are usually a little colder but, definitely, they are cheaper. The plastic ones, which can be imitation wood, are less expensive, their maintenance is minimal but they are not as resistant. If we talk about the floor and its decorative value, it can be played with different types of materials and shapes. From figures formed with ceramics to super glossy marble or porcelain surfaces. It all depends on tastes and the type of space in which you will place.

You can also experiment with the same type of material but in different formats or designs. If the flooring is to be placed in a large space, a good option is wood or bamboo flooring. They look barbaric and add a lot of elegance to spaces. If the room is small, wood, a type of light-colored ceramic or some other light surface can be included.

Lately, vinyl floors are being used a lot. Unlike a few years ago, new technologies are developing highly resistant plastic sheets with a wooden appearance that even the most experienced eye will hardly be able to differentiate.

A good option for large spaces is to use large format pieces. Whether in marble or porcelain, you can find slabs over a meter long that will look great. For small spaces, keep in mind the long direction of the pieces and place them in the long direction of the space: this will help make it feel more spacious.

Installation and maintenance

The installation of a floor should always be done by a professional. The installation time depends on the material you choose. Ceramic floors, which are the most common, can be installed in a few days. Floating wooden floors, in a few hours. If you like a more industrial style, you can opt for a polished concrete surface. The installation price depends on the material. You can place a floor from 120 rs per m2.

The maintenance of a floor is very important. Wood floors or floors, for example, must be frequently maintained with special products.

Over time, hardwood floors are often ruined and pieces begin to squeak. That is why periodic maintenance should always be carried out. On the other hand, surfaces that are covered with ceramic are easier to maintain since they only carry water and some cleaning product. Due to their price and another great advantage: they are cheaper, is that we see them in a large number of houses, commercial premises and buildings.

Insulation in floors

Floor vibration is a problem. Wood floors tend to pass sound. Floating floors can reduce this problem, whereas concrete floors are usually so strong that they do not have this problem, but they are also much more expensive to build and must meet the most stringent building requirements due to their weight.

Floors with a chemical seal, such as stained concrete or epoxy finishes, generally have a smooth finish that presents a potential slip and fall hazard, however there are anti-slip additives that can help alleviate this and provide greater traction.

Choosing the most suitable floor | Gurgaon | Noida | Delhi NCR

Door materials

To choose the material, the function of a door inside the house is one of the possible variables to take into account. For interiors, the favorites are usually wooden doors, which does not mean that wood is also spectacular on facades. There is a wide range of designs; the versatility of this material when it comes to accepting various turns and cuts, allows all decorative styles to choose from.

 

A warm and elegant look in all its versions is one of the reasons why it is used in homes. On the other hand, wood is a good insulator in both high and low temperature climates. As for costs, it all depends on the type of wood in question. Woods such as pine are among the most economical, unlike, for example, carob, which is more expensive because they are trees that require complex growing conditions.

 

The steel doors, meanwhile, conform to interior and exterior; although it is on the facades, garage doors and gates where they are most used. Steel resists any climate, without presenting, over the years, disadvantages with respect to corrosion. The price of this material is one of the highest; however, the investment is justified by its high performance.

 

Another option is fiberglass, especially for the exterior. It is a compound that allows an interesting offer in designs and styles, thus greatly expanding the range of options. Contrary to what can be assumed, the price of these doors is affordable, although they tend to last less than steel ones.

 

Along the same lines as fiberglass, it can be placed with vinyl, whose external characteristics are similar. Both materials can offer textures and shades that simulate wood, or be smooth, plate type doors. The difference is that vinyl is only used on interior doors.

 

Those of aluminum tend to last long when they are of good quality, and quantity of designs available is immense. They can be used in interiors or main doors, combined with glass or smooth. In addition, their price is generally the most accessible, so they are one of the most used and popular, along with hollow metal ones.

 

Without a doubt, hollow metal or sheet metal doors are the ones in greatest demand on the market. They are very durable and good for indoors and outdoors. In any case, these do not offer a very high durability, since although they tolerate high temperatures; they are not able to insulate the house from the cold or to resist too much the humid climate, since they begin to rust very soon.

 

Door locks

Again, depending on its use and function, each door will have its ideal type of lock. Broadly speaking, reliability is resolved according to whether they are more or less strong in their closing system.

 

Three types of locks can be distinguished: spring locks, cataloged within simple locks for the home; standard deadbolt locks, with devices that provide a little more strength in the closed; and deadbolt locks, undoubtedly the strongest of the three, for security doors.

 

Types of Doors

While the variations of door designs and styles are many, a handful of concepts can be mentioned from which all the others emerge. The differences will then be made according to the dimensions, color, materials and details that each person adds to their door, depending on whether it is traditional, modern, rustic or arched doors.

 

The traditional ones can have panels that provide transparency, such as glass or various plastics. We find in this category fiberglass, metal, glass or wood sliding doors. Also the doors with windows that open at the top.

 

The modern ones are characterized by clean and straight lines. While the rustic ones are distinguished by being made of heavy materials such as wood or iron, the French-style arched doors are another variant for those who love the old, colonial or eclectic.

 

How long does it take to install a door?

There are a few factors that determine the time it takes to install a door, accounting for labor and the needs of the job itself. In addition, installing one may mean that a previous opening has to be removed beforehand. In these cases, about 3 to 5 hours of work are calculated performing the task between the professional and an assistant.

 

How much does it cost to install a door?

The calculations of the cost of installing a door will always have to do with the type of door in question. Anyway, assuming that the opening is already done and it is only the frame and the simple leaf, it can be stipulated that a professional carpenter fix an average of 3 thousand to 4 thousand rupees.