Interior Designer in Gurgaon | Dwarka | Noida | Delhi NCR

Residential and Commercial | 9891050117


Interior Designer in Chhatarpur

An Interior Designer is someone who create a beautiful design for home and office, an interior designer takes care of all things which are the part of interior design it may include colors, painting, wall, furniture, showcase and lighting etc.

 Service areas | Dwarka | Delhi NCR | Noida Extension | Gurgaon | Faridabad | Ghaziabad | Indirapuram | Manesar |

An interior designer takes care of your home design with his creativity, an interior designer does not force you according to him with his services. First of all an interior designer knows about your need and your design about your home than he add on something special in your home design services which you like a lot. An interior designer design your property as you want when an interior designer designs your home he make it more beautiful as you want it.

Designers craft spaces that anticipate our needs and appeal to our emotions while pulling from a broad set of skills and technical knowledge. Interior design has changed dramatically since the early 20th century when it was just beginning to emerge as a profession.


Interior designers are expected to have working knowledge of:

  • Textiles, materials, color, space planning, sustainability, and more
  • Software applications for 2D & 3D computer-aided design (CAD) and building information modeling
  • Structural requirements, health and safety issues, and building codes

Today, interior designers work with contractors, architects, engineers, craftsmen, furniture dealers, and business and home owners. To become a successful interior designer, you need a well-rounded education and the skills to work within many disciplines (architecture; graphic design; decorative arts; and textile, furniture, and lighting design).

Build an Interior wall over the carpeting

When you're remodeling your home, building an interior wall allows you to divide a larger room into two smaller rooms, which can meet your changing needs. If the room where you're building the wall has carpeted floors, you must first remove the carpet where the wall is being installed. Doing this enables you to connect the wall to the subfloor, providing a firmer base while making it easier to remove the rest of the carpet in the future.

Step 1

Choose the location for the wall by using a stud finder to locate the studs in the intersecting walls that the new wall will be attached to. Attaching the end studs of the new wall to the studs of the existing walls can strengthen it.

Step 2

Lay 2-by-4 boards on the floor where the wall is being built. Cut into the carpet and padding with a utility knife, using the 2-by-4s as a guide. Lift the boards out of the way, and remove the carpet and padding to expose the subfloor.

Step 3

Cut the molding away from the base of the intersecting walls with a reciprocating saw.

Step 4

Mark the location of the doorway onto the subfloor, and measure the distances from the ends of the doorway to the walls. Cut pressure-treated 2-by-4s that match these distances to be the sill plates upon which the wall framing will sit.

Step 5

Attach the sill plates to the floor with galvanized screws every 6 inches.

Step 6

Cut a non-pressure-treated 2-by-4 that is the same length as each sill plate. These will be the bottom plates for the frame. Cut a third board that measures the length of the entire wall, which will be the top plate.

Step 7

Cut the wall studs out of non-pressure-treated 2-by-4 boards. Calculate the height of the wall studs by subtracting the thickness of two 2-by-4s from the distance between the ceiling and the top of the sill plates.

Step 8

Nail a stud into each end of the bottom plates, then nail studs in between the two end studs, keeping the studs spaced no further than 16 inches apart.

Step 9

Nail the top plate to the tops of the studs.

Step 10

Lift the frame into place on top of the sill plates with an assistant's help. Nail the frame to the sill plates, and attach it to the studs in the intersecting walls and the ceiling with drywall screws.

Step 11

Cut two 2-by-4s that are the same height as the door, and nail them to the end studs in the doorway. These studs are called the jack studs, and the end studs are called the king studs.

Step 12

Cut the header for the doorway from a 2-by-4. The header is the same length as the distance between the two king studs.

Step 13

Nail the header to the top of the jack studs. Nail a stud between the header and top plate. This is called the cripple stud. If there is more than 16 inches between the cripple stud and the king studs, use multiple cripple studs.

Step 14

Measure and cut drywall sheets to fit on the wall. Attach them to the framing with drywall screws every 16 inches.

Step 15

Staple flexible corner beads to the edges of the doorway, using one staple every 3 inches.

Step 16

Apply joint compound to the joints between the sheets of drywall and over the corner beads with a putty knife. Place drywall tape over the joint compound, and run the putty knife over the tape to press it into the joint compound. Allow it to dry overnight.

Step 17

Sand the joints with fine-grit sandpaper, and wipe the dust off the wall with a clean, dry rag. Add two more applications of joint compound and drywall tape, allowing each coat to dry overnight and sanding it smooth.

Step 18

Coat the walls with latex-based primer and allow it to dry.

Step 19

Paint the walls with two coats of paint, allowing each coat to dry.

Step 20

Nail molding to the base of the wall with finishing nails.


You must be able to come up with a plan for the area you have or you are working in. Not everyone has the same taste and likes everything you like, so you have to be able to pick things out for all sorts of people. Also being organized is a must. There are many tasks all at once in this career such as, meeting with contractors, scheduling deliveries, selecting fabric, and paint colors. There is also a large possibility that you could have more than one client at a time.Interior designer do not  work for a salary but have their own practices and therefore what we earn depends on what we charge and how much they work we get! And this in turn will depend on both skill level and client base, which is developed through good practice and networking. Salaried interior decorators work in industry example kitchen, bathroom and fabric showrooms and the remuneration is variable based on industry award agreements. The problems an interior decorator will face is who else will be advertising. in my opinion, if you desire to decorate your house to furnish it as an ordinary home, explore the net.

Interior designers make interior spaces functional, safe, and beautiful by determining space requirements and selecting decorative items, such as colors, lighting, and materials. They read blueprints and must be aware of building codes and inspection regulations, as well as universal accessibility standards.

Interior Designers use the evidence-based design process in designing and renovating healthcare centers, clinics, doctors' offices, hospitals, and residential care facilities. They specialize in making design decisions based on credible research to achieve the best possible outcomes for patients, residents, and the facility.

| Chhatarpur | Residential | Commercial |

Interior Designer in Sector 62 GurgaonInterior Designer in sector 62 Gurgaon